Building’s Assembly Guide

Disculpa, pero esta entrada está disponible sólo en Inglés Estadounidense. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

HOW TO CONSTRUCT & PAINT BUILDINGS AND DIORAMAS TUTORIAL

This video will show you how to build and paint buildings from start to finish using MiniArt’s kit.

 

Build up guide

1  Necessary tools & accessories for modelling

2  35513 French Cafe

3  You need very sharp awl


Scratch edges several times by sharp awl

5  Scratch the ends by sharp awl several times

6  Break by the line (Break trough)


7 Break by the line (Break trough)

Cut the opening for window

For gluing smooth out edges with sandpaper


10  Ready

11 Technological ledges of details

12  Cut away the ledges

13  Smear edges with glue twice

14  Glue rear parts of the walls

15  Press the parts to each other

16  Mark the line for cutting

17  Scratch along the marked line several times by awl


18  Break along the scratched line

19  Take the piece of sand paper.
You can glue the sand paper on the piece of wood.

20  Sand the gluing line at the 45 angle


21  Mark the cutting line

22  Cut the marked area

23  Smear the back side of front wall with glue twice

24  Smear front side edges of wall with glue

25  Glue details together

26  Now press parts together

27  Mark the cutting line

28  Scratch along the marked line several times by awl

29  Make the cut with scissors at the 45 angle

30  Break along the scratched line

31  Sand the gluing line at the 45 angle

32  Smear the surface with glue twice
 
33  Glue the parts

34  After gluing press hardly and leave to dry for 24 hours

35  Cut the rest of glue by sharp hobby knife


36  Take away the joint of gluing by scratching


37  You need the triangular filler

38  Make the lines between bricks by triangular filler


39  You need the piece of sand paper

40  Clean the corners of the building by the sand paper

41  Smear the planks of the floor several times

42  Glue the parts
 
43  Glue the detail of sign on the front wall of the building

44  Press it

45  Take the details of roof

46  Smear each details of roof glue twice

47  Take away the joint of gluing by scratching

48  Glue each other

49  After dry sand the edges of the roof

50  Glue separate tiles. Glue wind boards to end of a roof.

51  Glue window frames of doors & windows

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *